Razorock safety razor Superslant L2+

Razorock safety razor Superslant L2+

The Razorock Superslant goes beyond the simple concept of Slant (oblique), thanks to the new helical cut that improves
performance and comfort in absolute terms.
Normally during the mechanical twisting of the razor blade (given by the slant closure), a micro wave is created on the edges that is difficult to see with the naked eye. This curvature makes the razor more biting than it should be.
The new Helical twist of the Superslant safety razor eliminates this common flaw by completely changing the shaving experience.
To achieve this result, Razorock used a very complex CNC machine with 5-axis simultaneous milling.

Introducing the world’s first helical blade safety razor made of 316L stainless steel.
Razorock Superslant is the most sophisticated safety razor ever created and guarantees absolute shaving safety.

The Razorock Superslant has three levels of aggressiveness:
L1 (Gentle)
L2 (Medium)
L3 (Aggressive)

But within these main levels, there will be additional plates (sold separately) to further adjust the preferred shaving level.
Each plate is universally compatible with all the Top caps (caps) of the Superslant razor series. Just change the base plate.

Additional base plates:
L1+ | L1++ | L1++ OC
L2+ | L2++ | L2++ OC
L3+ | L3++ | L3++ OC

Important note:

Finish: These razors are work tools, not jewelry. We use a vibratory finishing process that maintains the highest possible tolerances for razors. This means that the razors will not be mirror-finished and will not be free of marks. The razors may show some milling or finishing marks.
Safety razors can be polished by the customer at a later time, but our goal is to sell the razor with the best possible tolerances and at the lowest possible price.
The metal-to-metal contact of the handle locking against the base plate will create a ring mark on the base. It is common for the handles to have micro dents due to the tumbler finish. To prevent this from happening, we suggest purchasing the razor-saving washers available here

Technical specifications:

Aggressiveness level: L2+
Head material: 316L stainless steel
Handle: 316L stainless steel HD
Handle dimensions: 14mm x 82mm
Weight: 108 gr
Finish: vibratory
Detail: Each head is engraved with a unique serial number.

Additional information:

The + plates have a milled bevel on the guard that creates greater aggressiveness.
The ++ plates have a milled step on the guard that creates greater aggressiveness.

PROUDLY MADE IN ONTARIO, CANADA

Tightening a safety razor correctly does not mean cranking it down hard until you damage the threads. Proper tightening usually involves a small final turn once you’ve reached the stop. In addition, to preserve the handle’s threading, it’s recommended to always join the head and handle while keeping them perfectly straight and aligned.

A well-maintained safety razor lasts a long time and stays looking good, which is why cleaning after every use is an essential step. Daily maintenance doesn’t require complicated procedures: after shaving, rinse thoroughly with warm water and a mild cleanser (such as hand soap or shampoo), then dry each part carefully.

We also recommend not leaving the blade installed and dirty in the razor. If it stays damp and covered with residue, the blade can start micro-oxidation; over time these marks can transfer or leave stains on the razor as well, worsening the appearance of the finish.

Special attention for zamak razors: with this material it’s important to disassemble, rinse, and dry every single component after use. In particular, the top cap thread is an area where water and residue can easily build up: if neglected, over time this can trigger corrosion and wear, eventually weakening the thread and compromising functionality.

To protect materials and finishes, avoid any “extreme” methods: do not boil the razor, do not put it in the dishwasher, and do not use harsh products or aggressive procedures. Even on high-quality razors, these practices can damage chrome plating, anodizing, and other coatings.

Do you have a brass razor and want to restore its shine? A simple remedy is to soak the components in a bowl with lemon juice for about 10–15 minutes. Then rinse and dry with a soft, scratch-free cloth for a clean, bright finish.