Razorock safety razor Superslant L1

Razorock safety razor Superslant L1

The RazoRock Superslant goes beyond the simple Slant concept, thanks to the new helical cut that improves
performance and comfort in absolute terms.
Normally, during the mechanical twisting of the razor blade (given by the slant closure) a micro wave is created on the edges that is difficult to see with the naked eye. This curvature makes the razor more biting than it should be.
The new helical twist of the Superslant safety razor eliminates this common defect, totally changing the shave.
To achieve this, Razorock used a very complex CNC machine with simultaneous 5-axis milling.

Thus was born the world’s first 316L stainless steel helical blade razor.
The RazoRock Superslant is the most sophisticated safety razor ever created and guarantees absolute shaving safety.

The RazoRock Superslant has three levels of aggression:
L1 (Gentle)
L2 (Medium)
L3 (Aggressive)

But within these main levels you will find additional plates (sold separately) to further adjust your preferred shaving level.
Each plate is universally compatible with all Superslant razor series top caps. Simply change the base plate.

Additional base plates:
L1+ | L1++
L2+ | L2++
L3+ | L3++

Important note:

Finishing: These razors are working tools, not jewellery. We use a vibration finishing process that maintains the highest possible tolerances for the razors. This means that the razors will not be mirror-finished and will not be free of marks. Razors may show some milling or finishing marks.
Safety razors can be polished by the customer at a later date, but our goal is to sell the razor with the best possible tolerances and at the lowest possible price.
The metal-to-metal contact of the handle clamping against the base plate will create a ring-shaped mark on the base. It is common for handles to show micro dents due to the tumbled finish. To prevent this from happening, we suggest the purchase of the saver washers available here.

Technical specifications:

Aggression level: L1
Head material: 316L stainless steel
Handle: Super Knurl 316L stainless steel
Handle dimensions: 13mm x 90mm
Weight: 82gr
Finish: vibrofinisher
Detail: Each head is engraved with a unique serial number.

Further information:

The + plates have a milled bevel on the guard that creates more aggression.
The ++ plates have a milled step on the guard that creates greater aggressiveness.

PROUDLY MADE IN ONTARIO, CANADA

Tightening a safety razor correctly does not mean cranking it down hard until you damage the threads. Proper tightening usually involves a small final turn once you’ve reached the stop. In addition, to preserve the handle’s threading, it’s recommended to always join the head and handle while keeping them perfectly straight and aligned.

A well-maintained safety razor lasts a long time and stays looking good, which is why cleaning after every use is an essential step. Daily maintenance doesn’t require complicated procedures: after shaving, rinse thoroughly with warm water and a mild cleanser (such as hand soap or shampoo), then dry each part carefully.

We also recommend not leaving the blade installed and dirty in the razor. If it stays damp and covered with residue, the blade can start micro-oxidation; over time these marks can transfer or leave stains on the razor as well, worsening the appearance of the finish.

Special attention for zamak razors: with this material it’s important to disassemble, rinse, and dry every single component after use. In particular, the top cap thread is an area where water and residue can easily build up: if neglected, over time this can trigger corrosion and wear, eventually weakening the thread and compromising functionality.

To protect materials and finishes, avoid any “extreme” methods: do not boil the razor, do not put it in the dishwasher, and do not use harsh products or aggressive procedures. Even on high-quality razors, these practices can damage chrome plating, anodizing, and other coatings.

Do you have a brass razor and want to restore its shine? A simple remedy is to soak the components in a bowl with lemon juice for about 10–15 minutes. Then rinse and dry with a soft, scratch-free cloth for a clean, bright finish.

Weight	120 g
Dimensions	12 × 5,5 × 3 cm
Brand	Razorock
EAN	900000000913
Razor Type	Slant
Shaving Frequency	Daily
Razor Aggressiveness	Very mild