Parker safety razor variant adjustable chrome

Parker Safety Razor Variant Adjustable Chrome

The Parker Variant Adjustable is a precision tool that will serve you well for many years. It is the perfect razor for beginners and experts alike. The blade angle can be adjusted by turning the knob on the bottom of the razor, so that the exposure can be set to each individual’s preference. This beautifully designed black and satin chrome plated all brass frame is a heavyweight, smooth shaver. Parker Safety Razor has been making the highest quality, precision engineered safety razors for over 45 years.

Adjustable Settings: Multiple settings to adjust the blade angle with a dial at the bottom with settings from 1-5, with 1 being the mildest and 5 the most aggressive. Customizable settings accommodate differences in facial hair thickness, skin type, preference and experience level.

Weight : 110gr
Length : 102mm
Design: Two-Piece Design Ensures Precise Blade Alignment
Blade Type: Double Edge
Handle material: Genuine brass frame, satin chrome plated

When reinserting the cover plate,make sure that the notch marking on the side of the cover plate is on the same side of the the razor handle as the notch marking which is engraved on the base plate. This is required so the adjustment settings on the razor will calibrate properly. tighten the knob on the bottom of teh razor until the razor cover plate is in the lowest position (lined up at 1)

Tightening a safety razor correctly does not mean cranking it down hard until you damage the threads. Proper tightening usually involves a small final turn once you’ve reached the stop. In addition, to preserve the handle’s threading, it’s recommended to always join the head and handle while keeping them perfectly straight and aligned.

A well-maintained safety razor lasts a long time and stays looking good, which is why cleaning after every use is an essential step. Daily maintenance doesn’t require complicated procedures: after shaving, rinse thoroughly with warm water and a mild cleanser (such as hand soap or shampoo), then dry each part carefully.

We also recommend not leaving the blade installed and dirty in the razor. If it stays damp and covered with residue, the blade can start micro-oxidation; over time these marks can transfer or leave stains on the razor as well, worsening the appearance of the finish.

Special attention for zamak razors: with this material it’s important to disassemble, rinse, and dry every single component after use. In particular, the top cap thread is an area where water and residue can easily build up: if neglected, over time this can trigger corrosion and wear, eventually weakening the thread and compromising functionality.

To protect materials and finishes, avoid any “extreme” methods: do not boil the razor, do not put it in the dishwasher, and do not use harsh products or aggressive procedures. Even on high-quality razors, these practices can damage chrome plating, anodizing, and other coatings.

Do you have a brass razor and want to restore its shine? A simple remedy is to soak the components in a bowl with lemon juice for about 10–15 minutes. Then rinse and dry with a soft, scratch-free cloth for a clean, bright finish.