Fatip safety razor special edition piccolo

Fatip safety razor special edition piccolo

The most compact razor in the collection. The weight (70 g) is evenly distributed for a more balanced shave. Glossy black handle finish, glossy black head, gold open comb plate + additional closed comb plate. Total plates: 2 (open + closed comb).

Weight: 70gr
Total length: 80mm
Handle length: 71mm
Head width: 42mm

Fatip, the safety razor Made in Italy
Fatip safety razors are ENTIRELY made in Italy. The metal used is brass, which is worked by the craftsmen of Premana, first in shape and then plated in various finishes.

Step 1: The head is mounted by unscrewing the handle and lifting the lid
Step 2: The new razor blade is positioned under the lid
Step 3: The handle is screwed back on and tightened, ready for shaving

Indications: The Fatip razor is suitable for all skin types, particularly for those who love a deep shave.
Suggestions: Use a pre-shaving product, a quality shaving cream or foam.
Tips: A softening hot shower before shaving to reduce the chances of abrasions or small cuts.

This safety razor is a product of Italy, with a total length of 80mm and a handle length of 71mm. The head width is 42mm, and it weighs 70g. It comes with two plates, one open comb and one closed comb. The Fatip safety razor is recommended for all skin types, especially those who prefer a deep shave. For best results, use a pre-shaving product and a quality shaving cream or foam. It’s also advised to take a hot shower before shaving to soften the skin and reduce the chances of abrasions or small cuts.

Tightening a safety razor correctly does not mean cranking it down hard until you damage the threads. Proper tightening usually involves a small final turn once you’ve reached the stop. In addition, to preserve the handle’s threading, it’s recommended to always join the head and handle while keeping them perfectly straight and aligned.

A well-maintained safety razor lasts a long time and stays looking good, which is why cleaning after every use is an essential step. Daily maintenance doesn’t require complicated procedures: after shaving, rinse thoroughly with warm water and a mild cleanser (such as hand soap or shampoo), then dry each part carefully.

We also recommend not leaving the blade installed and dirty in the razor. If it stays damp and covered with residue, the blade can start micro-oxidation; over time these marks can transfer or leave stains on the razor as well, worsening the appearance of the finish.

Special attention for zamak razors: with this material it’s important to disassemble, rinse, and dry every single component after use. In particular, the top cap thread is an area where water and residue can easily build up: if neglected, over time this can trigger corrosion and wear, eventually weakening the thread and compromising functionality.

To protect materials and finishes, avoid any “extreme” methods: do not boil the razor, do not put it in the dishwasher, and do not use harsh products or aggressive procedures. Even on high-quality razors, these practices can damage chrome plating, anodizing, and other coatings.

Do you have a brass razor and want to restore its shine? A simple remedy is to soak the components in a bowl with lemon juice for about 10–15 minutes. Then rinse and dry with a soft, scratch-free cloth for a clean, bright finish.